Lifting

Two man operation especially designed for handling concrete kerb stones. There is a lug on one side that releases the grip when touched against a stone already in place making a very tight joint. Grips longitudinally so that it can be used in tightest spaces. No deflection of the plumb line. All models are equipped with a lifting eye. Galvanised finish. Gripping range 500mm-1045mm Inside height 40mm Gripper length 100mm Carrying capacity 100kg Weight 12 kg Learn More

For the effortless transportation of bound or loose pavers, kerb stones, slabs, etc.. Clamping is done by bending a lever 90° (maximum pressure 15 kp). An integral protection device prevents overloading of the clamping mechanism. A favourable load distribution and the light-weight-nature of the device (68 kg) ensures optimal operating. Its narrow build (115 cm/45”) means it can be used on the smallest building sites. Blocks can easily be loaded from the pallet without the need of a ramp. Fully mechanical. Adjusts smoothly and without the need for tools. Adjustable gripping width from 550 mm – 1,050 mm. The minimum and maximum gripping widths can be altered using special grippers. Durable surface protection by galvanizing Learn More

Vacuum-Handy VH1/25 Non-Porous Slab Lifter This is a cheap solution to install non porous slabs using vacuum. The vacuum suction force is produced by only pressing the device down onto the surface of the slab. Afterwards the slab can be lifted by hand.To release the slab, just a finger tip is necessary to open a simple valve. Please note: Can only be used on non porous materials close to ground level. Device must never be set down onto edges, as this can damage the seal. Either set it down to an even surface or lay it down sideways for storage. One-man operation for lightweight slabs and short transportation distance. Accurate and quick installation with no gap in-between slabs. Ergonomically good working position for installation. Also already layed slabs can be picked up again. Robust seal ring, can be exchanged within seconds without glueing. Specifications Code : VH1/25 280mm diameter suction plate Carrying capacity 25kg Dead Weight 5Kg Learn More

TU8 Tirfor Winch Learn More

TU16 Tirfor Winch Learn More

Suitable for handling steps, kerb stones, L-stones, etc. in conjunction with a lifting device. Easily adjustable opening width by means of a spring-loaded bolt. Available in two different configurations: TSZ-UNI: Considerable inside height Gripping Range 50 – 600 mm Carrying Capacity 600 kg Conical kerb stones are also gripped securely, as the gripper has an inside height of 185 mm thus being able to grip underneath the conical form. Learn More

Tirfor T516/TU16 Wire Rope D11.5 + Hook 20M Learn More

Tirfor T516/TU16 Wire Rope C12 D11.5 + Hook 60m Learn More

Tirfor T516/TU16 Wire Rope C12 D11.5 + Hook 50m Learn More