Lifting

Two man operation especially designed for handling concrete kerb stones. There is a lug on one side that releases the grip when touched against a stone already in place making a very tight joint. Grips longitudinally so that it can be used in tightest spaces. No deflection of the plumb line. All models are equipped with a lifting eye. Galvanised finish. Gripping range 500mm-1045mm Inside height 40mm Gripper length 100mm Carrying capacity 100kg Weight 12 kg Learn More

For the effortless transportation of bound or loose pavers, kerb stones, slabs, etc.. Clamping is done by bending a lever 90° (maximum pressure 15 kp). An integral protection device prevents overloading of the clamping mechanism. A favourable load distribution and the light-weight-nature of the device (68 kg) ensures optimal operating. Its narrow build (115 cm/45”) means it can be used on the smallest building sites. Blocks can easily be loaded from the pallet without the need of a ramp. Fully mechanical. Adjusts smoothly and without the need for tools. Adjustable gripping width from 550 mm – 1,050 mm. The minimum and maximum gripping widths can be altered using special grippers. Durable surface protection by galvanizing Learn More

Flexible and powerful hand operated laying device for dense products, such as granite or high quality concrete elements up to 150 kg weight. Consisting of the following components: Vacuum pump unit with manometer and suction force indicator, battery charging indicator and on/off switch. Complete unit detachable, can also be mounted on other devices. Powered by rechargeable battery 12 V. Special energy saving automatic allows a full day of laying operation without the need of recharging. Handle for 2 men operation, handles height and width adjustable to accomodate with different laying tasks. With Suction plate. The seal can be exchanged without glue and any tool within 1 minute. Additionally equipped with lifting eyelet for crane hook (only allowed to work near the ground!). Optional Extra: NEW: By means of the Chain box KF vacuum laying device VACUUM-POWER-HANDY VPH can be operated with lifting devices as well. When operating the vacuum equipment with a lifting device the chain has to be passed underneath the load every time when elements are lifted up in order to avoid the load from falling down in case of power failure. Retrofitting of existing vacuum devices with the chain box KF can be done at any time. Learn More

Vacuum-Handy VH1/25 Non-Porous Slab Lifter This is a cheap solution to install non porous slabs using vacuum. The vacuum suction force is produced by only pressing the device down onto the surface of the slab. Afterwards the slab can be lifted by hand.To release the slab, just a finger tip is necessary to open a simple valve. Please note: Can only be used on non porous materials close to ground level. Device must never be set down onto edges, as this can damage the seal. Either set it down to an even surface or lay it down sideways for storage. One-man operation for lightweight slabs and short transportation distance. Accurate and quick installation with no gap in-between slabs. Ergonomically good working position for installation. Also already layed slabs can be picked up again. Robust seal ring, can be exchanged within seconds without glueing. Specifications Code : VH1/25 280mm diameter suction plate Carrying capacity 25kg Dead Weight 5Kg Learn More

VA3 Self Reciprocating Ram Learn More

VA2 Self Reciprocating Hydraulic Ram Learn More

TU8 Tirfor Winch Learn More

TU32 Tirfor Winch Learn More

TU16 Tirfor Winch Learn More